Sunday, February 13, 2011

A600: ClassicWB 3.5 installation + videos

OK I really love weekends... Especially the ones that include some Amiga workout

I haven't really messed with hardware this week except for the custom 1.3/3.1 Kickstart switch that at the same time disables ACA630 for old software compatibility.
I messed with software though and that had to do with installing Bloodwych's ClassicWB 3.5 (with custom kickstart 3.5 loaded via MapROM).
Bloodwych told me that 3.5 is a bit more responsive than 3.9 so I had to check it out...

...DAMN, IT REALLY IS!!!

I'm attaching 2xYouTube links from booting OS3.5 and booting kickstart 1.3 just to check it out for yourselves.

Booting Bloodwych's ClassicWB 3.5:





Booting Kickstart 1.3 + Hybris via HxC SD Emulator:




Since the YouTube videos can't show how well the WB looks... I'm attaching some screenshots as well:





I hope you like them (damn CreateOutline seems really good! Thanks for the tip Cammy)

Wednesday, February 2, 2011

A1200: DVD-RW mod

One more nightly build... ehm, I mean update

It was time for the internal DVD-RW to take it's proper position and case to be dremeled...

Before I start, I thought of putting an extension to the Eject button (that tiny soldering was hard for meh skillz)




After putting the correct spacers... the result was really cool (yep the measuring, filling etc, took a lot of time). Also a tiny 25mm fan was put under the side of the DVD-RW just to give a little bit of cooling to Indy etc.






The backside of the DVD-RW was put with a little drip of hotglue to Idefix Express Gayle adapter and CF adapter.



The most irritating and most difficult part was measuring, cutting and filling A1200's case for the slot-in's hole
Talking about a loooooooooong time and patience. I wouldn't do that again for the world! Also a tiny button was put into place (next to the hole) as an Eject button along with a header.








Everything was mounted and AT LAST... I saw my miggy closed after 1.5 year!
Haven't took a photo yet but will do in the next update that is gonna be soon. I just feel good for finally coming close to completion (or at least I think I do).

Tuesday, January 25, 2011

Guide: DF0 as External Drive (on A600)


  • Locate the U8 Chip
  • Cut trace of Pin 15 and Pin 16 as showed with the "yellow" line in the photo
  • Connect the Pin 11 of the Floppy connector to U8's Pin 15 as shown in the photo
  • Connect the Pin 9 of the Floppy connector to U8's Pin 16 as shown in the photo

Disclaimer: I haven't tried this mod to any of my Amigas so try this at your own risk. This mod has been discussed further on Amibay here.